Leather Men's Bracelet – Rogue Multi-Charm Layered Bracelet Set
Leather Men's Bracelet – Rogue Multi-Charm Layered Bracelet Set
Couldn't load pickup availability
- Free tracked shipping worldwide
- 30-day returns — refund or exchange
- Measured in real centimetres, stated on every page
Layered Rebellion with the Leather Men's Bracelet – Rogue Multi-Charm Layered Bracelet Set
The Leather Men's Bracelet – Rogue Multi-Charm Layered Bracelet Set trades a single bracelet for a whole stack — five or six individual leather bands bundled together, each with its own texture and charm, so one slide onto the wrist delivers a full layered look instead of just one strap. Braided cords, a woven herringbone band, a stitched buckle strip, and a bead-and-charm strand all sit side by side, unified by the same black leather and aged silver-tone hardware.
Each set carries its own theme through the charms threaded onto the strands: a skull and crossbones motif with a pentagon star bead, a run of polished rivets paired with an infinity symbol, or a watchful evil eye alongside a feathered wing charm. The leather itself is soft PU leather, chosen for comfortable long-term wear, backed by zinc alloy hardware finished to hold its aged, weathered look through daily use.
Every strand in the set uses an adjustable drawstring closure, so the whole stack tightens or loosens with a simple pull — no clasps to fumble with, no sizing chart to check first. That makes it just as easy to wear the full stack together for a bold, layered look or peel off individual strands to mix into your own everyday rotation.
A set like this is built for sharing as much as wearing: split the strands between yourself and a friend, gift the whole stack to someone who likes their jewelry with some edge, or keep it as a fast way to build a layered wrist look without buying five separate bracelets one at a time.
Product Features & Specifications
- Set of 5-6 individual leather bracelets bundled as one stack
- Braided, woven, herringbone, and stitched-buckle band textures combined
- Aged silver-tone zinc alloy charms and beads throughout
- Three set styles: Pentagon & Skull, Rivet & Infinity, or Evil Eye
- Soft PU leather construction for comfortable everyday wear
- Adjustable drawstring closure on every strand, no clasp needed
- One-size-fits-most design, suitable for men and women alike
- Wear the full stack together or separate strands individually
- Lightweight despite the layered, multi-strand construction
- Punk-inspired styling with a worn-in, weathered finish
- Easy to share between friends or family as matching pieces
- A ready-made layered look, ideal as a gift for any bracelet-stacking fan
Frequently Asked Questions About Leather Men's Bracelet – Rogue Multi-Charm Layered Bracelet Set
How many bracelets are in the set?
Each set includes 5 or 6 individual leather bracelets, depending on the style chosen, all designed to be worn together as one layered stack.
What are the strands made from?
Soft PU leather bands paired with aged zinc alloy charms and beads, finished with a weathered, antique silver-tone look.
How do I adjust the size?
Every strand has its own adjustable drawstring closure — simply pull to tighten or loosen, with no clasp or measuring required.
Can I wear the strands separately?
Yes — each bracelet in the set can be worn on its own or mixed into your own stack, in addition to wearing the full set together.
Shipping
Shipping
Standard shipping is free worldwide, with no minimum order. Pieces are dispatched within 1 to 3 business days, engraved pieces included.
United Kingdom 7 to 12 business days · Ireland and the EU 8 to 14 · United States and Canada 8 to 15 · rest of the world 10 to 20. Express is available at checkout.
Returns
Returns
You may return any piece within 30 days of delivery, faulty or not. Approved refunds go back to your original payment method within 14 days of us receiving the item.
Returns are free within the United Kingdom. Email us before sending anything back; return by any tracked method and we refund the postage with your order. Outside the UK you cover return postage. Where a piece is faulty, damaged or incorrect we always cover it, wherever you are.
UK consumers also keep the statutory 14-day right to cancel under the Consumer Contracts Regulations 2013. An exchange is available on request, and faulty pieces are replaced or refunded in full at no cost to you.
Care
Care
Stainless steel survives water and needs nothing but an occasional wipe. Gold-tone and plated pieces come off before swimming, showering and the gym. Sterling silver tarnishes and polishes back with a soft cloth.
Leather dislikes being soaked — let it dry away from direct heat. Beaded bracelets should be rolled onto the wrist, never stretched over the hand: over-extension is what kills the cord.
Men's Bracelet Size Guide
How to Find Your Men's Bracelet Size
A bracelet that fits well sits close to the wrist without pinching, and slides about a centimetre when you move your arm. Getting there takes one measurement and about two minutes.
Step 1 — Measure your wrist
- Take a flexible tape measure, or cut a strip of paper about 1 cm wide.
- Wrap it around your wrist just below the wrist bone, on the side closest to your hand. This is where a bracelet naturally settles.
- Pull it snug against the skin, but not tight enough to compress it.
- Mark where the strip overlaps, then lay it flat against a ruler. That number is your wrist circumference.
Measure the wrist you actually intend to wear the bracelet on. For most people the dominant wrist is slightly larger.
Step 2 — Add the right allowance
Your wrist measurement is not your bracelet size. You add an allowance on top, and how much depends on the style and how you like it to sit.
| How you want it to sit | Add to your wrist measurement |
|---|---|
| Snug — barely moves, close to the skin | + 1.3 cm |
| Comfort — the standard fit, slides slightly | + 2.0 cm |
| Relaxed — sits loose, moves down the hand | + 2.5 cm |
Example: a 18.0 cm wrist with a comfort fit gives you a 20.0 cm bracelet.
Step 3 — Adjust for the style
Different constructions sit differently on the same wrist:
- Chain and stainless steel bracelets — follow the comfort allowance above. Heavier links hang lower, so if you are between sizes, size up.
- Beaded bracelets — beads have thickness, which eats into the internal circumference. Add roughly 1.3 cm and no more; beaded pieces are meant to sit close.
- Leather bracelets — add 1.5 to 2.0 cm. Leather softens and relaxes slightly with wear, so avoid going too generous at the start.
- Rope bracelets — many are adjustable. If yours has a sliding knot, your wrist measurement plus 1 cm is enough as a starting point.
Typical sizes
For reference, most adult men measure between 17 cm and 20 cm at the wrist, which puts the majority of finished bracelets between 19 cm and 22 cm. If you are buying a gift and cannot measure, 20 cm is the safest single choice, and an adjustable or extendable style is safer still.
| Wrist | Comfort fit bracelet | Usually described as |
|---|---|---|
| 15.0 – 16.5 cm | 17 – 18.5 cm | Small |
| 16.5 – 18.0 cm | 18.5 – 20 cm | Medium |
| 18.0 – 19.5 cm | 20 – 21.5 cm | Large |
| 19.5 – 21.0 cm | 21.5 – 23 cm | Extra large |
Buying without measuring
If you have no tape measure to hand, a strip of paper and a ruler works exactly as well. A shoelace or phone charging cable marked with your thumbnail and then laid flat is also accurate enough. What does not work is guessing from a watch strap: watch straps are worn higher on the arm, where the wrist is wider.
Still between two sizes?
Go up. A bracelet that is slightly generous reads as intentional; one that is slightly tight is uncomfortable within an hour and shows on the skin. And if it turns out wrong, you have 30 days to send it back — see our returns policy.
Any doubt at all, email support@verizime.com with your wrist measurement and the piece you are looking at, and we will tell you which size to take.